SOLUCIONADA: Order for affixing a new iFixit screen onto the iPad

Order for affixing a new iFixit screen onto the iPad

Greetings,

I am installing a new front panel screen assembly onto this model of iPad (5-LTE) for a friend. I purchased the iFixit kit with the new screen supplied (part no. 128000-8) with various protective pieces of film on the glass. Colored tabs (red, blue, light blue) are provided for ease of removal. Not in the box is any suggested order for removing the protective films. Obviously, at least one, if not two, need to be removed before I can re-attach the Home button assembly.

Would anyone who has done this using an iFixit purchase have any sage advice for me?

Many thanks,

DLC

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Postado: 10 de jun de 2019

Opções

You want to remove the protective film at the very last moment, literally just before sealing up the device, otherwise you will probably have fingerprints and other smudges on the glass surface.

In order to put the Home Button flex in place, you can just lift up the bottom edge of the protective film, apply the flex and then put the film back in place.

Check out this answer (After doing my repairs (battery and screen) I have problems) I posted earlier for other general best practices on the iPad Air/5 re-assembly.

Esta resposta foi útil?

Sim Não

Pontuação 3

1 comentário:

Hi Minho,

Thank you for the response, and the link to your invaluable information and advice.

Regards,

DLC

12 de jun de 2019 por dlcatftwin

Adicionar um comentário

iPad 5 LTE

Order for affixing a new iFixit screen onto the iPad

1 resposta

Adicionar a sua resposta