Rep: 1
2
1
In need to replace a component, saw filter, but don’t seem to find it anywhere on the net… Can you help me out?
This is the part:
FL2_RF FILTER_SAW_LMTPFJGAE 50_LGA radio_mlb(43C3)single_brd(24)
On the left side you see a piece of the battery connector.
Esta é uma boa pergunta?
Rep: 34,7 mil
10
22
44
I would suggest getting a donor board. I can't find any online either
Esta resposta foi útil?
I’m somewhere ‘glad’ i’m not the only one who can’t find it :)
Donor board it is, thanks for the advice!
Donor board is a no go. The component false apart the moment you touch it... So if anyone finds a solution please let me know!
How did you try removing it. I tried on a board there and got it of without it breaking
Tried with hot air but the moment i try to pick it up with a tweezer it breaks. Thanks for your help!
try flux and 370c and dont grab tightly with the tweezers
Rep: 221,5 mil
15
290
807
These glass IC's are very delicate. It doesn't look like it has any underfill so you should let it flow properly before applying any pressure with the tweezers. Apply flux, heat it up and gently push it when you see adjacent components and solder start to flow. Once the IC's moves and bounces back, it's sign that it is ready to be removed.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 3
Últimos 30 dias: 7
Duração total: 78
