Rep: 25
1
The machine has worked fine for several months. Without moving it or making any changes, water now pours out from beneath the machine from the open holes on the rear bottom of the unit
Esta é uma boa pergunta?
Rep: 451,6 mil
11
367
1,4 mil
Hi @kyotesue ,
Here’s a link to the ifixit Cuisinart DCC-3200 Hot Plate Replacement guide.
Check if the red tube shown in Step.3 (both ends of the silver metal pipe) has become loose or split etc.
Esta resposta foi útil?
Rep: 13
1
Últimas 24 horas: 0
Últimos 7 dias: 6
Últimos 30 dias: 17
Duração total: 1,259
1 comentário
I’ve had this happen with two of my Cuisinart PerfecTemp 14-cup programmable coffeemakers. The second one was under warranty and the replacement displayed an error code of ErH after one use. I was told by customer service to unplug the unit and wait 24 hours then plug back in. It still gave the same error message.
por tranquility057