Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

iPhone 6 pentalobe screws

I have replaced few iPhone 6 screen and I've noticed, those pentalobe screws don't attach tight everytime and sometimes they just keep spinning and don't get tight. What do I do wrong with them? I do get them off, but with tricks and not normal way.

Answered! View the answer I have this problem too

Is this a good question?

Pontuação 0
Adicionar um comentário

3 Respostas

Chosen Solution

Well what I experienced a lot of times is the following:

So sometimes when I screw them in the, display is not completely down so the screws don't get in the hole.

My advise is to apply light pressure on the screen under the home button and than try to screw them in.

Maybe this works, I hope so. If not let me know.

Was this answer helpful?

Pontuação 1
Adicionar um comentário
Pergunta Mais Útil

Try this liberation kit: iPhone 5/5s/6/6 Plus Liberation Kit

Was this answer helpful?

Pontuação 2

Comentários:

I have bigger iFixit kit. Does this offers something special to pentalobe problem?

por

@saltwater well YES! It replaces all the Pentalobe screws with Phillips screws.

por

Adicionar um comentário

They're very delicate screws and if you or anyone else overtightened them they will strip easily. You cold try putting a bit of extra Loctite (thread locker) on the threads. It's important to develop a delicate touch when dealing with all of these tiny screws.

Was this answer helpful?

Pontuação 1

Comentários:

Ok, I see. Does this mean that in such event screw itself breaks a bit and needs to be changed or does overtightening break the hole/thread itself?

por

Could be both, you will need to look closely at the screws to see if they are damaged and see if new ones grip well in the "holes".

por

Adicionar um comentário

Add your answer

Marko Himanka will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 85