Hisense Sero 8 f5281
Hi all just found my daughters old sero 8 pro f5281 and wish to know if any has ever change digitizer as 1/4 of screen has gone off. I was to view all old photos on it but can't see so wish to know if anyone has any idea how to open it up to see if ribbon has just worked it's way out. Thanks in advance all
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
This guide should show you how to get into it:
Esta resposta foi útil?
Wrong model sero 8 it's the retina screen with metal body and no screws visible
A Marine Corps motto is "Improvise, Adapt and Overcome." There's no screws visible on this one either!
Rep: 783,6 mil
1,1 mil
893
2,3 mil
@betsy81532 pretty much the same way as the other ones. Check this video on how to get into it (use a better tool than a credit card;-) This video, although for a 7 Pro will show you how to get to the LCD/Digitizer. It is identical than the 8 Pro. If you must replace it try to find a complete assembly instead of trying a glass only repair.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 3
Últimos 30 dias: 5
Duração total: 337
