Conserte seus objetos Comunidade Loja
Participe da comunidade de reparos - Criar conta

Lançado em 16 de setembro de 2016. Modelo 1660, 1778 Disponível como GSM ou CDMA / 32, 128 ou 256 GB / Ouro Rosa, Dourado, Prateado, Preto Mattte e Preto Brilhoso.

20 Perguntas Visualizar todos | Peças para 78 Loja

Opções

iPhone 7 Dead On Arrival

iPhone 7 came in. They said it wouldn't come on, and has been off for weeks. I installed a new display, and decided to test a known good battery, instead of waiting for the old one to accept a charge. It does not come on, and the board is extremely hot. I unplugged and left on the charger for 20 mins. Doesn't come on, but doesn't get hot either. I'm concerned about leaving it unattended on the charger. Also I tested the display and battery on a different phone. All seems good. Her old display comes on, LCD is trashed. There are some holes in the glass, but top left, not too right, where the board is and no signs of water damage

@refectio @oldturkey03 @mayer I forget Bens tag @benjamen50

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 1
Adicionar um comentário

2 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

Go bare board and add modules until you understand what is drawing excess current. If it's just the bare board, then start at the beginning and look for shorts or partial shorts. It sounds like this phone took a beating so it could be anything really.

BTW it's @refectio ;>) (maybe we should create a @TheMedinho account ...naw, TPTB might not like it )

Esta resposta foi útil?

Sim Não
Pontuação 4

9 comentários:

Don't have a bare board, or anything like that, really, for this situation. How could I have messed that up!?!?!

por

My plan at this point @refectio, is to first get consent from the customer, which I don't really need as the board is pretty messed. Tear off the shields and see if I can get any kind of an answer. Gotta put those needles back on my leads

por

I meant connect just the board with nothing but the battery (and after, the dock) and see if things still heat up.

por

Sorry, I misunderstood after our conversation of bare boards. Getting it out now, and seeing what's going on @refectio

por

Yep @refectio no display, just charger and board, gettin crazy hot. Tried a different Lightning dock. Same answer

por

Exibir mais 4 comentários

Adicionar um comentário

Opções

Check all the main voltage rails, and can you be specific about what part is heating up? It might burn you accidentally, but the trick I use all the time is to put the board up to my face and see what parts heat up the most.

Esta resposta foi útil?

Sim Não
Pontuação 3

4 comentários:

It's the top. Yeah, I do that as well. I haven't taken the board out yet. Not super sure if there's any non invasive fixes for this problem

por

Pop it open and use a thermal sensor gun to locate the villain. IR Thermometer

por

Will do tomorrow @mayer after that, I'm gonna guess next will be removing the shields and seeing if anything is missing of out of place, and as @gigabit87898 said doing some testing

por

Yep board is measuring everything above the fpc connectors at 125 degrees farenheight

por

Adicionar um comentário

Adicionar a sua resposta

iMedic será eternamente grato(a).
Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 10

Ao todo: 582