Ir para o conteúdo principal

A versão somente wi-fi do Air iPad, da Apple, modelo número A1474. Disponível nas cores cinza espacial ou prata, conta com o processador A7 personalizado, com configuração de armazenamento de 16, 32, 64, e 128GB.

291 Perguntas Visualizar todos

I need a display cable bracket

I am repairing an iPad Air 1st Gen and have found that a previous repair shop did not replace the display cable bracket shown in step 37 for this guide:

iPad Air Wi-Fi Front Panel Assembly Replacement

I have spent several weeks on the internet trying to find the price with now luck. I've lost 8 bids on eBay auctions trying to get an iPad for-parts. At this point, I'm looking to manufacture a facsimile of the part out of a small aluminum plate. Before I do that, I thought I would ask this community.

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0

Comentários:

You can put like something else above it to act as a metal plate to keep it in place as well, you know that right?

por

But what could you put? I'm in the same idiotic predicament!

por

I'm perplexed at the fact no one manufactures this stupid plate anywhere...

por

I ended up fabricating one from flashing I purchased at Home Depot.

por

What is flashing? And how'd you do it?

por

Mostrar mais 1 comentário

Adicionar um comentário

1 Resposta

Pergunta Mais Útil

I believe that bracket really is only there to keep the cable in place. If you are having trouble finding the part honestly I would either look for the same generation iPad in not working condition on ebay or another auction site or just drill small holed in any small piece of metal to save some money.

Esta resposta foi útil?

Pontuação 2

Comentários:

Good suggestion, you could use a old shield form pretty much any donor board and cut to size.

por

Adicionar um comentário

Adicionar a sua resposta

gwarren será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 168