Hi everyone,
I recently purchased an ipad mini 2 of ebay which had a broken screen and a the touch screen didn't work. I replaced the digitizer without a hitch and everything works, except the digitizer still does not respond to touch. Does anyone have any experience with this/advice about what to do? Any help will be appreciated! Thank you!
Esta é uma boa pergunta?
Rep: 23
3
Hi Rohan! If you folded the ribbon cable correctly and you haven't damaged the cable, the solution is that you bought a faulty digitizer. I came across the same situation and the digitizer i bought was faulty.
BUT before changing the digitizer again try reseting the ipad by holding the Sleep/Wake button and the Home button at the same time for at least ten seconds until the Apple logo appears. See then if it responds.
Esta resposta foi útil?
Rep: 1,1 mil
4
You should take a look at the connector that it plugs into and see if it looks damaged.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 1
Últimos 30 dias: 1
Duração total: 67
