Ir para o conteúdo principal

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

220 Perguntas Visualizar todos

Missing solder pad on Touch screen connector iPad mini 2

Hi guys,

We have a problem.

A customer brought an iPad 2 mini. I disassembled ipad, and I realized the touch screen connector was damaged. I removed the connector with solder iron, but one of the solder pad are missing.

what is the solution ?

thanks

Tibor

picture:

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

3 respostas

Solução escolhida

This is all wrong !!! The missing pad is 5th pad !! 5 NC - no connection !!

Block Image

Yellow selection is pad 6,

Block Image

oldturkey :D

Esta resposta foi útil?

Pontuação 2

7 comentários:

@fixlab excellent job in finding this. Amazingly enough it took a year for somebody to catch this error. I did correct the original answer.

por

@fixlab I have the same problem. The pads number 5, 15, and 17 are missing. Colud you help me with the schematic picture? Where could I connect the missing pads? Thanks!

por

gabor, pin 5 is nc, pin 15 is ground and 17 you can connect to the large cap to the left side of the connector. on the right side of the cap

por

Thank you daniel!

por

Exibir mais 2 comentários

Adicionar um comentário
Pergunta mais útil

Iphoneszerviz Szeged, correction. That is contact #5 of J1700. It does not need anything. NC no connection

Block Image

Esta resposta foi útil?

Pontuação 6

6 comentários:

Very useful, Thank you!

por

By placing a jumper from the cable to the board?

por

thank you old turkey, :)

por

@oldturkey03 extremely grateful!

por

@iphoneszerviz, did you manage to repair this? Can u post a pic or explain a little what you had to do exactly? We are facing a similar prblem ourselves with the exact same pad ripped off during a connector replacement

por

Exibir mais 1 comentário

Adicionar um comentário

Iphoneszerviz Szeged,

try to use best or recommended rework tools when you touching high tech logic boards. Here i can see one path Path damaged on your logic board.

you have two options,

1) Change the new logic board

2) Path modification : check the path destination and you may have to connect them physically

All the best!

Esta resposta foi útil?

Pontuação 2

3 comentários:

circuity diagram available this iPad?

por

creativeelectron (http://creativeelectron.com/) seeking your support to find path of 8th contact - TP

por

jessabethany, seeking your support as well

por

Adicionar um comentário

Adicionar a sua resposta

Iphoneszerviz Szeged será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Duração total: 4,732