Rep: 77
5
4
Okay, got another fix going on... Have an 15" Early 2011 logic board with a broken connector for the microphone. Looks like this can be removed and a new one soldered on. Can someone point me in the right direction for finding a replacement part?
Also, there are 2 pins broken over the I/O ports. Does this pose a problem? Are these standoffs, or some sort of ground to the bottom case/cover?
Thx,
Fred
Esta é uma boa pergunta?
Rep: 782,8 mil
1,1 mil
893
2,3 mil
Fred Turner, that is reference designator J6780 which is a Molex 78171-0003 Headers & Wire Housings 3P WTB VERT HDR PICO EZMATE connector. Available at places [http://Headers & Wire Housings 3P WTB VERT HDR PICO EZMATE |like this] or Molex. com directly. The pin you are pointing to on the picture is SH0913 which is a EMI pogo pin and should not cause you any issues. I can not really see the second pin you are referring to. Hope this helps, good luck
Esta resposta foi útil?
As usual, oldturkey, THANK YOU!! I feel bad having you coming to the rescue on every inquiry I've made... Where do I send the beer? :-P What's your source for all of this goodness?? Just curious...it may be Top Secret though...
No secrets, just years of ifixit hobbying and collecting almost 1 TB of service manuals:-) Once you have all your projects fixed will have that beer together:-)
Últimas 24 horas: 1
Últimos 7 dias: 1
Últimos 30 dias: 1
Duração total: 149
