Fórum de reparo Samsung Vacuum
Perguntar
Navibot used to count down upon power on , the countdown was erratic.
sem resposta Samsung NaviBot SR8855 0 respostas
My doc station does not work
sem resposta Samsung POWERbot R7070 0 respostas
VR10M703BWG/SB is turning off immediately after it leaves charger
sem resposta Samsung Vacuum 0 respostas
vacuum is making a grinding type of noise when it has drag.
sem resposta Samsung Powerbot R9250 0 respostas
How do I delete floor plans in the app?
sem resposta Samsung POWERbot VR9000 0 respostas
Bought this need to know how to set it to run over 15 minutes
sem resposta Samsung POWERbot VR9000 0 respostas
Where can I find a new roller brush for this model? R7070
sem resposta Samsung POWERbot R7070 0 respostas
Wheel won't turn or drop
sem resposta Samsung Vacuum 0 respostas
How to remove the brush cover.
sem resposta Samsung POWERbot VR9000 0 respostas
Error code C07 - vaceem backs up and stops
sem resposta Samsung Powerbot R9250 0 respostas
NaviBot SR8855 stopped working
sem resposta Samsung NaviBot SR8855 0 respostas
Device not charging when docked in charging station
sem resposta Samsung POWERbot VR9000 0 respostas
My powerbot got its software stuck so it wont start cleaning
sem resposta Samsung POWERbot VR9000 0 respostas
Why my robot doesn't boot up
sem resposta Samsung NaviBot SR8855 0 respostas
SR8825 No power. IC1 getting hot
sem resposta Samsung NaviBot SR8855 0 respostas
Why does my unit only move inches forward and inches in reverse
sem resposta Samsung Powerbot R9250 0 respostas
VR7000 wont start even though it is fully charged
sem resposta Samsung POWERbot VR9000 0 respostas
Where is the Wifi antenna located
sem resposta Samsung POWERbot R7070 0 respostas
The device won't charge at all
sem resposta Samsung Navibot Cornerclean sr10f71ub 0 respostas
Powerbot won't turn on at all
sem resposta Samsung POWERbot R7070 0 respostas
