Ajuda para GameCube Controller Repair: aprenda a consertar com as próprias mãos.

Participe da comunidade de reparos - Criar conta

GameCube Controller Repair

Perguntas em alta no fórum

Fazer uma pergunta

2 respostas

0 pontos

How do I Replace Joystick Component?

GameCube Controller

2 respostas

5 pontos

How to replace the cord with a new one.

GameCube Controller

1 resposta

0 pontos

Why is my right trigger keep activating without me pressing it?

GameCube Controller

1 resposta

1 pontos

I can't open my controller because of a stripped screw

GameCube Controller

Ferramentas

Estas são algumas ferramentas comuns usadas para executar trabalhos neste dispositivo. Talvez você não precise usar todas elas em cada procedimento.

The Nintendo GameCube Controller, or DOL-003, was originally released in 2001, bundled with the Nintendo GameCube. Because of its compatibility with the Nintendo GameCube, the Nintendo Wii, and the Wii U and Switch (with a special attachment), it still is widely used as of 2026.

Departing from the 3-pronged "M shaped" design of its predecessor, the Nintendo 64 controller, the GameCube controller features two grips with a joystick and directional pad on the left side, a small start button in the center, and the A, B, X, and Y buttons along with a C stick on the right side. On the top edge of the controller are the left and right triggers, and the Z button located slightly above the right trigger. The controller also features a built-in motor to provide "haptic feedback", or rumbling, while playing games.

A Nintendo GameCube controller is fairly easy to identify. A GameCube controller has four face buttons (9 including the D-pad and start/pause button), most of which are styled differently (The A button, for example, is the largest, and is green in color, while the B button is significantly smaller and colored red). If you flip over the controller so the buttons are facing down, you can find "Nintendo GameCube Controller DOL-003" engraved on the left side behind the C-Stick. This page specifically addresses a wired GameCube controller identified by a 6 foot long cable extending from the top of the controller and lacking an on/off switch and a battery pack as seen in the the wireless version. The standard colors include silver, purple, orange, and black, but there are several special edition colors like clear or gold.