Conserte seus objetos Comunidade Loja

Remplacement de l'affichage du mode professionnel du Shark Ultimate

Voltar para o guia
Inglês
Francês
Passo 6
Shark Ultimate Professional Mode Display Replacement: passo 0, imagem 1 %32 Shark Ultimate Professional Mode Display Replacement: passo 0, imagem 2 %32

  • Use the Philips head #0 screwdriver to remove the two 9.82mm screws (left and right) from the white border on top of the circuit board.

  • Pull the circuit board out from its affixed position.

Utilisez le tournevis cruciforme n° 0 pour retirer les deux vis de 9,82 mm (gauche et droite) de la bordure blanche en haut du circuit imprimé.

Retirez la carte de circuit imprimé de sa position fixée.

-[* black] Use the Philips head #0 screwdriver to remove the two 9.82mm screws (left and right) from the white border on top of the circuit board.
+[* red] Use the Philips head #0 screwdriver to remove the two 9.82mm screws (left and right) from the white border on top of the circuit board.
[* black] Pull the circuit board out from its affixed position.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.