MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Logic Board Replacement

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 8 guias que incluem este passo.

Inglês

Coreano

Traduzindo o passo 10

Passo 10

Lift up the left side of the logic board and disconnect the gray and black power cable from the bottom of the board.
Pull the power cable connector parallel to the face of the logic board.
Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case.
If you detached the heatsink from the motherboard two steps above, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our Applying Thermal Paste Guide to prepare the processor and heat sink surfaces.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.