Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.
Traduzindo o passo 1
Passo 1
-
Orient the device with the screen facing down as shown in the picture and locate the speaker.
-
Locate where the flash's wires connect to the motherboard.
-
Desolder the speaker's wires from the motherboard and remove the speaker by pulling gently to see if the wires have been desoldered.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.