Ir para o conteúdo principal

iPod Classic Vervanging van de batterij

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.

Inglês
Holandês
Passo 17
iPod Classic Battery Replacement: passo 0, imagem 1 %32
  • There are two ribbon cables connecting the rear panel to the rest of the iPod. In the following step, be careful not to damage these ribbon cables.

  • Grasp the front panel assembly with one hand and the rear panel with the other.

  • Take a deep breath!

  • Gently (GENTLY) disengage the remaining clips on the rear panel by pulling the tops of the front and rear panels away from each other (think of the bottom of the iPod as a hinge), taking great care not to damage the ribbon cables holding the two halves together.

Er zijn twee lintkabels die de achterste behuizing met de rest van de iPod verbinden. Zorg dat je, in de volgende stap, voorzichtig te werk gaat en voorkomt dat je de lintkabels beschadigt.

Pak het voorste paneel met je ene en het achterste paneel met je andere hand vast.

Adem diep in!

Maak de resterende klemmen in de achterste behuizing op rustige wijze (RUSTIGE WIJZE!) los door de bovenkanten van beide helften van elkaar weg te trekken (denk aan de onderkant van de iPod als een scharnier). Voorkom dat je de lintkabels, die beide helften met elkaar verbindt, beschadigt.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.