Conserte seus objetos Comunidade Loja

iPod Classic Vervanging van de batterij

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.

Voltar para o guia
Inglês
Holandês
Passo 5
iPod Classic Battery Replacement: passo 0, imagem 1 %32

  • Push with your fingers on the rear panel behind the putty knife to minimize bending. Slowly flex the putty knife, as shown in the picture, to ensure that most of the metal tabs on this side of the iPod are disengaged.

  • The theory behind this method is, rather than attempting to not bend the rear panel at all, to bend it in a favorable manner that allows you to easily restore it later. Therefore, any bend in the sides of the rear panel should be drawing the lip of the rear panel away from the iPod, rather than pushing out on the curved surface. This method also disengages as many of the side clips as possible.

Druk je vingers tegen de zijkant van het achterste paneel om ervoor te zorgen dat deze minimaal verbuigt bij het omhoog wrikken van je mes. Trek je mes vervolgens, zoals te zien is op de foto, naar buiten om de klemmen voor het grootste deel los te maken.

De theorie achter deze methode is dat, in plaats van te pogen de behuizing helemaal niet te buigen, deze zo te buigen dat deze later weer makkelijk te herstellen is. Dus iedere verbuiging van de achterste behuizing zorgt ervoor dat de klemmen losser komen te zetten door deze van de iPod weg te trekken.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.