Ir para o conteúdo principal

Remplacement de la batterie de l'iPod classic

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.

Inglês
Francês
Passo 4
iPod Classic Battery Replacement: passo 0, imagem 1 %32
  • At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.

  • There are thin metal rails running along the inside of the rear panel, so take great care when inserting the putty knife.

  • Once the putty knife has cleared the lip of the rear panel, pivot the putty knife so that it is vertical, and carefully (but firmly) wiggle it straight down into the gap between the opening tools.

Dans un angle, insérez soigneusement le couteau à mastic sur environ 3 mm dans la jointure entre les deux outils d'ouverture.

De minces rails métalliques font le tour de la coque arrière à l'intérieur, faites donc attention lorsque vous insérez le couteau à mastic.

Une fois que le couteau à mastic a dégagé le rebord de la coque arrière, faites pivoter le couteau afin qu'il soit vertical et appuyez soigneusement (mais fermement) tout droit vers le bas dans l'espace entre les outils d'ouverture.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.