Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 5 guias que incluem este passo.
Traduzindo o passo 2
Passo 2
-
Using the spudger tool, carefully remove the bottom of the battery from it's location below the logic boards.
-
The battery is attached to the motherboard with some adhesive, so you may need an iOpener to loosen up the adhesive. Check out the iOpener guide for info on how to do it.
-
Do not pull the battery from the tablet yet, as it is still connected to the motherboard.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.