Conserte seus objetos Comunidade Loja

Casio CZ-1000 Power Switch Replacement

Voltar para o guia
Inglês
Alemão
Passo anterior

Traduzindo o passo 2

Passo 2
Casio CZ-1000 Power Switch Replacement: passo 0, imagem 1 %32 Casio CZ-1000 Power Switch Replacement: passo 0, imagem 2 %32 Casio CZ-1000 Power Switch Replacement: passo 0, imagem 3 %32

  • Heat the soldering iron and use a desoldering braid or pump to remove the solder from the pins of the old switch.

  • Once the solder is removed, gently pull the old switch out of its place.

  • If the replacement switch doesn’t have pre-attached leads, you’ll need to solder wires to it. If it has leads, align them with the matching holes on the PCB where the old switch was connected.

  • Position the new switch in place, ensuring the leads align correctly with the pads on the PCB. Solder the leads securely, using just enough solder to create a strong connection without any excess that might cause shorts.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.