Ir para o conteúdo principal

Left Nintendo Switch NES Controller Charging Rail Replacement

Inglês
Francês
Passo 2
Left Nintendo Switch NES Controller Charging Rail Replacement, Unscrew the battery housing: passo 0, imagem 1 %32 Left Nintendo Switch NES Controller Charging Rail Replacement, Unscrew the battery housing: passo 0, imagem 2 %32 Left Nintendo Switch NES Controller Charging Rail Replacement, Unscrew the battery housing: passo 0, imagem 3 %32
Unscrew the battery housing
  • Use a Phillips #000 to remove three 3.0 mm screws holding the battery and it's housing.

  • Remove the battery housing with the battery from the main board and set it aside.

  • At this point the battery is still attached to the motherboard by a connector so don't pull it off the board.

  • If you're not replacing the battery, you can leave it attached to the board to complete the repair, just be careful when moving them so you don't damage the connection.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.