Conserte seus objetos Comunidade Loja

Een Squareplug-patchkabel repareren met SP400-stekkers

Voltar para o guia
Inglês
Holandês
Passo 8
How to Repair a Squareplug Patch Cable with SP400 Plugs: passo 0, imagem 1 %32 How to Repair a Squareplug Patch Cable with SP400 Plugs: passo 0, imagem 2 %32

  • Solder the wires onto the plug connections:

  • Signal wire to the tip connection

  • Ground wire to the sleeve connection

  • The outer insulating jacket should slightly extend into the chamber of the plug to minimize cable movement.

  • Do not touch the plug directly while soldering.

Soldeer de draden op de plug contacten.

Signaaldraad op de tipaansluiting

Aardingsdraad op de sleeve aansluiting.

De buitenste isolatiemantel moet enigszins in de kamer van de plug uitsteken om beweging van de kabel te minimaliseren.

Raak de stekker niet direct aan tijdens het solderen.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.