Ir para o conteúdo principal

MacBook Pro 16" 2019 로직 보드 어셈블리 교체

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Coreano
Passo 40
MacBook Pro 16" 2019 Logic Board Assembly Replacement, Remove the logic board screws: passo 0, imagem 1 %32 MacBook Pro 16" 2019 Logic Board Assembly Replacement, Remove the logic board screws: passo 0, imagem 2 %32
Remove the logic board screws
  • Remove all eleven screws securing the logic board assembly:

  • Three 3.3 mm T3 Torx screws

  • Two 3.6 mm T5 Torx screws

  • Four 2.9 mm T5 Torx screws

  • One 4.0 mm T8 Torx screw

  • One 4.0 mm T8 Torx screw (large head)

  • During reassembly, install these screws only loosely. Adjust the board position if necessary until all the connectors line up, and then tighten the screws.

로직 보드 어셈블리를 고정하는 나사 열 한 개를 모두 풀어주세요:

3.3mm T3 Torx/톡스 나사 세 개

3.6mm T5 Torx/톡스 나사 두 개

2.9mm T5 Torx/톡스 나사 네 개

4.0mm T8 Torx/톡스 나사 한 개

4.0mm T8 Torx/톡스 나사 한 개 (큰 머리)

재조립할 때, 나사를 느슨하게 조이세요. 필요하다면, 나사를 더 조이기 전에 모든 커넥터들이 정렬하도록 로직 보드의 위치를 ​​조절하세요.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.