Ir para o conteúdo principal

MacBook Pro 16" 2019 로직 보드 어셈블리 교체

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Coreano
Passo 39
MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 1 %32 MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 2 %32
  • Disconnect all three antenna cables by prying each one straight up from its socket.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

안테나 케이블 세 개를 모두 소켓에서 똑바로 들어 올려 분리하세요.

핀셋이나 spudger/스퍼저의 평평한 끝을 각 케이블 아랫면에서 소켓 근처까지 밀어 넣은 다음 살살 비틀거나 들어 올려 분리하세요.

각 케이블을 다시 연결하려면 커넥터를 소켓 바로 위에 맞춘 다음 제자리에 고정하도록 아래로 누르세요.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.