Conserte seus objetos Comunidade Loja

电池更换

Inglês
Chinês

Pré-requisitos de guia

Todos os guias tipo pré-requisito devem ser traduzidos antes de essa tradução ser considerada concluída.

打开手表操作

移除电池

Guia de informações

= Concluído = Incompleto
    Use this guide to replace a worn-out or dead battery in your Apple Watch Series 4.
    This guide shows the procedure on the standard, GPS-only version of the watch, but the cellular/LTE version is similar.
    '''***For your safety, discharge your battery below 25% before disassembling your Apple Watch.'''*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    Note: If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions]].
    During the display opening procedure of the Apple Watch it is likely to damage the force touch gasket. If you separate the gasket layers or cut the cable, you'll also need to replace the Force Touch gasket itself.
    You’ll need '''***replacement adhesive'''*** to reattach components when reassembling the device.

      Passos do guia

      Passo 1 — 显示屏粘合剂

      以下步骤描述了在重新密封过程中如何使用替代粘合剂。

      Passo 2

      上下翻转 Apple Watch，以便在提起机壳时将显示屏放平。

      Passo 3

      用镊子小心地从底纸上除去带有蓝色保护膜的替代粘合剂。

      Passo 4

      斜着握住替换粘合剂，将其穿过显示屏。

      Passo 5

      使用撬棒的尖端进行最终位置调整，然后将粘合剂压入到位。

      Suas contribuições são licenciadas pela licença de código aberto Creative Commons.