Ir para o conteúdo principal

Huawei Mate 20 Pro Vervanging van de glazen achterkant

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 10 guias que incluem este passo.

Inglês
Holandês

Traduzindo o passo 7

Passo 7
Huawei Mate 20 Pro Rear Glass Replacement: passo 0, imagem 1 %32 Huawei Mate 20 Pro Rear Glass Replacement: passo 0, imagem 2 %32
  • Lift and remove the back cover.

  • Before installing fresh adhesive and reassembling, remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.

  • During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.

  • Secure the new back cover with pre-cut adhesive or double-sided adhesive tape. After installing the rear glass, apply pressure for several minutes to help the adhesive form a good bond, such as by placing it under a stack of heavy books.

Til de achterste behuizing omhoog en verwijder deze.

Verwijder, voordat je de nieuwe kleefstrips aanbrengt, alle oude lijmresten uit de telefoon. Maak de voorheen gelijmde gebieden vervolgens schoon met wat isopropyl alcohol en een stuk stofvrij doek.

Dit is, tijdens het weer in elkaar zetten van je toestel, een goed moment om je telefoon aan te zetten en alle functies te testen. Zorg dat je je telefoon weer uit zet voordat je verder gaat met deze procedure.

Bevestig je nieuwe achterkant met vooraf op maat gesneden kleefstrips of dubbelzijdige tape. Druk de achterkant, na het installeren ervan, gedurende een aantal minuten stevig aan, bijvoorbeeld met behulp van een stapel boeken, zodat de lijm zich goed kant hechten.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.