Ir para o conteúdo principal

Motorola Moto Z3 スクリーンの交換

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Japonês
Passo 11
Motorola Moto Z3 Screen Replacement, Remove the display: passo 0, imagem 1 %32
Remove the display
  • If the display remains stuck, re-heat and slice the adhesive repeatedly as needed.

  • Lift the display from the right edge and swing it open, away from the phone. The display is still attached to the phone chassis at the lower left edge, so do not fully remove it yet.

  • When you lift the display, two small plastic gaskets—one for the front-facing camera, and one for the front-facing sensors—may fall out of the phone. Keep track of these gaskets and make sure to reinstall them before sealing the phone.

ディスプレイの接着剤が外れていない場合、必要に応じて接着剤を再度温めて、切断してください。

ディスプレイを右端から持ち上げて開きます。 ディスプレイはまだシャーシ左下端と繋がっているため、まだ完全に取り外さないでください。

ディスプレイを持ち上げると、フロント向きセンサー用の2つの小さなプラスチックガスケット(1つがフロントカメラ用、もう1つがフロント向きセンサー用)がデバイスから落下する可能性があります。 このガスケットを探して、デバイスを密閉する前に必ず再装着してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.