Traduzindo o passo 3
Passo 3
(Optional) If you are keeping the cooler you should clean it thoroughly!
-
When your CPU is working under high load it will generate heat approaching it TDP. If the heatsink of the cooler is clog with dust and debis or the fan is not working well the CPU will over heat. You do not want this to happen!
-
As you can see a lot of dust had built up under the heatsink, even though the top had recently been cleaned!
-
How far you go in cleaning the heatsink is your decision. I removed the Fan assembly to clean it thoroughly.
-
The Fan assembly was held on with four plastic clips. very carefully use a flat blade screwdriver to pry the clip up a little and push the assembly up, repeat until the fan assembly comes off.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.