Ir para o conteúdo principal

Procedura di apertura

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 7 guias que incluem este passo.

Inglês
Italiano
Passo 4
Opening Procedure: passo 0, imagem 1 %32 Opening Procedure: passo 0, imagem 2 %32 Opening Procedure: passo 0, imagem 3 %32
  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the iPhone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick into the gap under the screen and the plastic bezel, not the screen itself.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

Scalda un iOpener e infilalo tra i bracci dell'Anti-Clamp.

Puoi anche utilizzare un asciugacapelli, una pistola termica o una piastra riscaldante, ma il calore eccessivo può danneggiare lo schermo e/o la batteria interna, quindi procedi con cautela.

Piega l'iOpener in modo che si appoggi sul bordo inferiore dell'iPhone.

Aspetta un minuto per dare all'adesivo la possibilità di scollarsi e creare un'apertura.

Inserisci un plettro di apertura sotto lo schermo e la scocca di plastica, non solo sotto lo schermo.

Se l'Anti-Clamp non crea un'apertura sufficiente, applica più calore all'area e gira la manopola di un quarto di giro.

Non girare la manopola di più di un quarto di giro alla volta e attendi un minuto tra ogni rotazione. Lascia che l'Anti-Clamp e il tempo facciano il lavoro per te.

Salta i prossimi tre passaggi.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.