Ir para o conteúdo principal

iPhone X Pentalobe/펜타로브 나사 교체

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 23 guias que incluem este passo.

Inglês
Coreano

Traduzindo o passo 1

Passo 1
iPhone X Pentalobe Screws Replacement: passo 0, imagem 1 %32
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

  • If the screws are stripped or damaged, replace the screws.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

시작하기 전에 iPhone 배터리를 25% 이하로 방전하세요. 충전된 리튬-이온 배터리에 실수로 구멍이 생기면 화재를 일으키거나 폭발할 수 있습니다.

분해를 시작하기 전에 iPhone 전원을 꺼주세요.

iPhone 하단 가장자리에 위치한 6.9mm-길이 pentalobe/펜타로브 나사 두 개를 빼주세요.

나사가 벗겨지거나 손상된 경우 나사를 교체하세요.

iPhone 디스플레이를 열게되면 방수 봉인이 손상됩니다. 이 단계를 수행하기 전에 교체용 봉인을 준비하거나 봉인 없이 iPhone을 재조립할 경우 액체에 노출되지 않도록 주의하세요.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.