Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Use this guide to remove or replace the two screws securing the iPhone X's display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • If the screws are stripped or damaged, replace the screws.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Confira os kits

    Enough RAM
    For All The Tabs

    Confira os kits
Conclusão

To reassemble your device, follow these instructions in reverse order.

22 outras pessoas concluíram este guia.

Jeff Suovanen

Membro desde: 06/08/2013

306.808 Reputação

255 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

130 Membros

12.415 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 15

Últimos 7 dias: 141

Últimos 30 dias: 651

Duração total: 16,810