Ir para o conteúdo principal
Ajuda
Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

Use a pick or small flathead to remove the 4 metal clamps holding device together.

Use a thin tool to pry the the device apart by lodging it between the clock face and back side of the device.

Note: a spudger may not be thin enough to fit in the seam of the device. We used the 6 inch metal ruler from the Pro Tech Toolkit.

Go slowly and carefully disconnect two cables before fully opening.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.