Ir para o conteúdo principal
Ajuda

Nintendo DSi Power Board Replacement

Editando passo 4 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on LED indicator ZIF connector.

Be sure you are prying up on the hinged retaining flap, not the socket itself.

After flipping up the locking tab on the socket, use your fingers or a pair of tweezers to gently pull the cable straight out of its socket.

If necessary, transfer the power board ribbon cable to your new power board.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.