Ir para o conteúdo principal
Ajuda
Editando passo 10 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.

The three cables are coded with black sleeves of different lengths. During reassembly:

Connect the long-sleeved cable to the center socket.

The short-sleeved cable connects next to the screw.

The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

When reconnecting the antenna cables, run them over the camera cable, not underneath.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.