Cut the strings to size.

For the bass strings, measure one tuner head's length and trim it there.

For the treble strings, measure one and a half tuner head's length and trim it there.

When inserting the string into the tuning post, the string end should protrude approximately 1/8th of an inch from the tuner hole.

The bass side tuning pegs should be turned in a counter-clockwise direction to tune to pitch and the treble side tuning pegs should be turned in a clockwise direction to tune to pitch.

Make sure to remember that the wraps around the tuning post must go under the string to properly stay in tune and to avoid creating a kink, which could break the string.

Two to three wraps are perfect for the bass strings. The treble strings require approximately six wraps.