Pular para o conteúdo principal
Ajuda
Editando passo 1 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 5 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Flip the Apple TV over so that the bottom of the unit is facing up.

You need to remove the rubber base to get access to the screws.

Starting at one side of the device, use a hairdryer or a heat gun to soften the adhesive holding the rubber base in place.

The rubber base will be hot after heating, take extreme caution while proceeding to avoid personal injury.

While the adhesive is still warm, peel the bottom of the rubber base upwards to detach it from the metal plate.

Repeat the procedure described above until the rubber base has been completely removed.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.