Conserte seus objetos Comunidade Loja
Ajuda

Oculus Quest 2 Disassembly

Editando passo 8 —
Remove the Bluetooth antenna

Tipo de Passo:

Arraste para reorganizar

Remove two P000, 4.8 mm long screws.

Remove four P000, 4.8 mm long screws.

Remove two P000, 10.7 mm long screws.

The arrow points to the Bluetooth antenna. To disconnect see step 5 of the Guide. Go to picture 2. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board.

Picture 3. Remove the antenna from the headset.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.