Ir para o conteúdo principal
Editando passo 2 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 6 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Insert a Jimmy or other metal tool between the right side of the plastic display and the metal frame, near the phone's side buttons.

This may require a considerable amount of force. Push the tool as far down into the gap as you can, taking care to not scratch the chassis of your device in the process.

Tilt the Jimmy downward while continuing to push it deeper into the gap to pry up the right side of the screen assembly.

Since the display on top of the screen assembly is flexible and only attached with a slight amount of adhesive, you may end up prying up only the display instead of lifting the entire assembly. If this occurs, remove the tool and try again, this time using more downward force to get underneath the entire assembly.

Ensure your tool is behind the entire screen assembly and not just the display. If done correctly, you should notice the thin silver metal midframe come up with the plastic display (as pictured).

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.