Esta tradução pode não refletir as atualizações mais recentes do guia de fontes. Ajude a atualizar a tradução ou veja guia de fontes.
Introdução
Use este guia para substituir a bateria de seu smartphone modelo Huawei P10.
O que você precisa
-
-
Desligue o seu smartphone.
-
Remova os dois parafusos Pentalobe P2 da parte inferior.
-
Remova a bandeja do chip SIM.
-
-
-
Insira uma ferramenta de abertura de plástico entre o display e o invólucro, começando pela área inferior de seu smartphone.
-
Faça alavanca cuidadosamente e libere o display e suas partes para fora do invólucro.
-
Depois de liberar a extremidade inferior, use a ferramenta de abertura para abrir os clipes em ambos os lados.
Hi! I cannot find a way to insert the plastic opening tool. Any suggestions on how I can create a gap to start. Everything seems quit rigid.
Also, where will I find your reply.
vbr/lars.skoldebring@gmail.com
Hi Lars, you might want to use a suction handle to lift the display and create a small gap to insert the plastic tool. If you don’t have a suction handle you can “build” a handle with tape that you stick onto the display in a shape similar to this —> __∏__ (also you may want to edit your post and remove your email address ;) )
Hi,
I’m stuck at this step for about two hours… There’s nothing I can do to open the case. Tried all kinds of opening tools and a suction handle. There is no gap at all between the display and the body. How can anything be inserted into a gap that practically does not exist? Please help.
Sorry to hear that. You could try and lift the display by using a suction cup and pull to create a small gap for a tool to get in.
-
-
-
Abra o smartphone virando uma parte para trás.
-
Use uma espátula para desconectar o cabo flex dos botões de ligar e volume.
Thanks JaL, of course it is.
-
-
-
-
Remova os dois parafusos Phillips tipo #00.
-
-
-
Retire a fita adesiva que está sob a bateria, puxando constantemente a tira, incidindo em um ângulo plano.
-
Use uma bolsa térmica iOpener para amolecer os resíduos de adesivo.
It wasn’t easy to find the piece to pull. It was a black label, folded and stuck to the battery
-
Para montar novamente seu dispositivo, siga estas instruções na ordem inversa. Ao montar novamente seu smartphone, aplique adesivos novos quando necessário.
Para montar novamente seu dispositivo, siga estas instruções na ordem inversa. Ao montar novamente seu smartphone, aplique adesivos novos quando necessário.
Cancelar: não concluí este guia.
81 outras pessoas executaram este guia.
Um agradecimento especial a esses tradutores:
77%
Estes tradutores estão nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›
16 comentários
Thanks for posting this this give me new ideas.
Facile comme bonjour. Les outils que j'avais reçu avec la batterie étaient de piètre qualité, j'ai donc utilisé des mini-spatules utilisées pour lisser les joints en silicone, c'est pile la consistance voulue pour décoller le dos et la batterie, ni trop ferme ni trop souple.
Easy fix, thanks a lot.
Eccellente guida peccato che una volta montata la nuova batteria in cellulare si sente che si accende la il display rimane buio, controllato connessioni ma sono tutte ok e display sempre spento, cosa può essere?
Adriano
Per prima cosa puoi provare a controllare il cavo più a sinistra (quello del display). Accertati che non abbia qualche tipo di piega e che anche i piccoli pin dei contatti non siano piegati.
albertob -
stessa cosa, avete poi trovato soluzioni?
Hello,
The battery seems connected but nothing appears on my screen.
Do you have any idea of where it comes from ?
i have the same issue. Any comment on this?
ottima guida
Easy to handle, great explanation and perfect equipment!
I did it! thank you so much Mr. Schnabelrauch. I feel proud
Hi Antoine,
happy to hear and have fun with your new battery life :)
thanks, only the battery was a problem with all the glue
Hi there, I had a battery that I just replaced that was swollen and device would just power cycle. New battery fixed that issue but now phone will not charge. Any tips?
Das Honor 9 hat an der Unterkante keine Schrauben.
Wie ist das Honor 9 zu öffnen?
Michael Tuschek - Responder
Vielleicht beantwortet diese Anleitung deine Frage ;)
Tobias Isakeit -
Hi, my P10 does not have screws, just two tiny holes. Do I push in here to unfasten? Einar, Norway
Einar Ryvarden - Responder
Hi Einar Ryvarden,
in case you bought a used or refurbished phone, someone might have forgotten to put them back in. Since you have holes at the bottom edge next to the charging port this is likely. You can try to start with step 2 and see if you can lift the phone assembly (don’t forget to remove the SIM tray first). As far as I know there is no version of the regular Huawei P10 with no screws. However you there are none in the P10 lite and in the P10 plus, maybe one of the opening procedures for those phones might help you.
Dominik Schnabelrauch -