Ryobi P271 Trigger Replacement

Participe da comunidade de reparos - Criar conta

Introdução

This repair is for if your trigger on your drill stops working or has issues cutting in and out. Soldering is required for this repair and it will fix your drill trigger for future use.

O que você precisa

Passo 1 Battery

Ryobi P271 Trigger Replacement, Battery: passo 1, imagem 1 %32

Ryobi P271 Trigger Replacement, Battery: passo 1, imagem 2 %32

Ryobi P271 Trigger Replacement, Battery: passo 1, imagem 3 %32

Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

Editar

Pergunte ao FixBot

Passo 2 Trigger

Ryobi P271 Trigger Replacement, Trigger: passo 2, imagem 1 %32

Remove the screws from the drill's casing to gain access to the interior.

Editar

Pergunte ao FixBot

Passo 3

Lift and remove the casing off of the drill body.

Editar

Pergunte ao FixBot

Passo 4

Carefully lift and remove the battery clip, trigger, motor, and everything connected to the wires and pull straight out of the drill.

Editar

Pergunte ao FixBot

Passo 5

Separate the wiring from the trigger and the motor using a soldering iron and them replace them with a new trigger and motor by soldering the wires back together.
Follow this guide for soldering tips.