Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

This guide will show users how to replace a defective or damaged rear camera lens in the Motorola Moto G7 Play. This guide applies to both the XT1952-3 and XT1952-2 models. The rear camera lens is capable of taking 13MP photos as well as 1080p video. Users may need to replace the camera if the lens is badly damaged. A damaged lens affects photo quality in the camera.

  1. Turn off your device before you begin. Use the iFixit pick to break the adhesive around the back case.
    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

  2. Detach the back case from the phone.
    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

  3. Telas LCD de reposição iPhone (com ferramentas)

    A opção econômica, coberta por nossa garantia vitalícia.

    Confira os kits

    Telas LCD de reposição iPhone (com ferramentas)

    Reduza os custos de reparo, não a qualidade.

    Confira os kits
  4. Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case. Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.
    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

  5. Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.
    • Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

  6. Lift the motherboard cover from the bottom.
    • Lift the motherboard cover from the bottom.

    • Use reverse tweezers or a similar tool if needed.

  7. Once the motherboard cover is removed, use the iFixit opening tool to disconnect the ribbon cable connecting the camera to the motherboard. The camera can now be removed and is ready to be replaced.
    • Once the motherboard cover is removed, use the iFixit opening tool to disconnect the ribbon cable connecting the camera to the motherboard.

    • The camera can now be removed and is ready to be replaced.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Monserath Casillas

Membro desde: 10-02-2020

741 Reputação

5 Guias de autoria

equipe

Cal Poly, Team S7-G4, Regan Winter 2020 Membro de Cal Poly, Team S7-G4, Regan Winter 2020

CPSU-REGAN-W20S7G4

5 Membros

5 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 15

Duração total: 46