Introdução

If there is any problem with the phone that you plan to repair, removing the battery is the first step in completing the repairs and is critical for safety while working on the phone.

  1. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.
    • Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.

    Adicionar comentário

  2. Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.
    • Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.

    Adicionar comentário

    • Lift up and remove the back panel.

    Adicionar comentário

    • After removing the back panel, use the spudger to lift and detach the Battery Flux Cable from the Motherboard.

    Adicionar comentário

    • Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Jack Haseman

Member since: 19-03-2018

892 reputação

6 Guides authored

Equipe

Baylor, Team S3-G2, Williams Spring 2018 Membro de Baylor, Team S3-G2, Williams Spring 2018

BU-WILLIAMS-S18S3G2

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 10

Últimos 7 dias: 90

Últimos 30 dias: 407

Todo: 2,249