Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

  1. Remove the two 8 mm Phillips #0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
    • Remove the two 8 mm Phillips #0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover. DO NOT detach the wire connecting the motherboard to the front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

  3. Grasp the white wire connector on the back of the motherboard to remove the USB cable. Wiggle the connector back and forth to remove it from the socket.
    • Grasp the white wire connector on the back of the motherboard to remove the USB cable.

    • Wiggle the connector back and forth to remove it from the socket.

  4. Desolder the joint on the front of the motherboard to completely detach the USB cable. Follow this link to learn how to properly solder and desolder your parts.
    • Desolder the joint on the front of the motherboard to completely detach the USB cable.

    • Follow this link to learn how to properly solder and desolder your parts.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cory Davis

Membro desde: 14-04-2013

236 Reputation

4 Guias de autoria

Equipe

Cal Poly, Team 12-34, Amido Spring 2013 Membro de Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 Membros

8 Guias de autoria

Adicione um comentário

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 11

All Time: 1,334