Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

The Auto Boot feature powers on your laptop as soon as you open the lid, so it must be disabled before undertaking certain repairs. Auto Boot can be found on 2016 (and newer) MacBook Pros and 2017 (and newer) 12" Retina MacBooks.

This guide will walk you through the process of disabling Auto Boot, and then re-enabling it when your repair is complete.

  1. Power on your Mac and launch Terminal. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.
    • Power on your Mac and launch Terminal.

    • To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.

  2. Copy and paste the following command (or type it exactly) into Terminal: sudo nvram AutoBoot=%00
    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%00

    • Press [return].

    • Your [return] key may also be labeled ⏎ or [enter].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

  3. Kit de pontas universal para chave

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de pontas universal para chave

    Upgrade Your Toolbox
  4. You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.
    • You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.

    • Remember, you must still disconnect the battery before servicing internal components.

  5. When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal:
    • When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature.

    • Power on your Mac and launch Terminal.

    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%03

    • Press [return].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

    • Alternatively, you may reset your Mac's NVRAM to re-enable Auto Boot.

Conclusão

Congrats! You're done.

9 outras pessoas concluíram este guia.

Jeff Suovanen

Membro desde: 06-08-2013

289.224 Reputação

256 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

116 Membros

11.191 Guias de autoria

hello may i ask, how do u make it Jeff$? mine’s scarlet$ and i want to change it but idk how

srhshahdzan - Responder

I can’t type anything into the terminal…what am I doing wrong?

Linda Sussman - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 57

Últimos 30 dias: 661

Duração total: 10,574