Introdução
This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.
Use this guide to replace the base vibrator adhesive in your Google Pixel Fold following a repair.
Follow this guide to remove the base vibrator, if you haven't done so already.
O que você precisa
-
-
Use tweezers, or your fingers, to peel off the adhesive strip from the bottom of the base vibrator.
-
-
-
-
Peel off the new adhesive strip from its liner and apply the sticky side to the vibrator.
-
Use a spudger, or your fingers, to press down the adhesive and adhere it.
-
-
-
Use tweezers, or your fingers, to pull on the tab and expose the top layer of adhesive.
-
Insert the base vibrator and apply pressure to adhere it to the frame.
-
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
