Conserte seus objetos Comunidade Loja

How to Apply New Back Glass Adhesive in Your Google Pixel Fold

Introdução

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Use this guide to replace the back glass adhesive in your Google Pixel Fold following a repair.

Follow this guide to remove the rear cover, if you haven't done so already.

O que você precisa

  1. How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Align the adhesive: passo 1, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Align the adhesive: passo 1, imagem 2 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Align the adhesive: passo 1, imagem 3 %32

    • Before removing any liners, check if the adhesive matches the frame.

    • The clear liner should face the frame.

    • Look for cutouts in the liner to help orient the adhesive.

    Editar

  2. How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Apply the adhesive: passo 2, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Apply the adhesive: passo 2, imagem 2 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Apply the adhesive: passo 2, imagem 3 %32

    • Be careful during this step, as it's easy to stick the adhesive in the wrong spot. Take your time and work slowly.

    • Peel off the new adhesive strip from its clear liner.

    • Align the adhesive over the frame, starting with the top right and bottom right edges.

    • Place the adhesive over the perimeter of the frame.

    Editar

  3. How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 3, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 3, imagem 2 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 3, imagem 3 %32

    • Use flat end of a spudger, or your fingers, to press down the adhesive to adhere it to the frame.

    Editar

  4. How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Peel up the large liner: passo 4, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Peel up the large liner: passo 4, imagem 2 %32

    • Peel up the segmented tab at the bottom right corner of the large blue liner.

    Editar

  6. How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 5, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 5, imagem 2 %32

    • Lift the tab and peel off the large blue liner to expose the secondary liner.

    Editar

  7. How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Reconnect the back glass: passo 6, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Reconnect the back glass: passo 6, imagem 2 %32

    • Support the back glass with your hand or prop it up on something sturdy.

    • Reconnect the back glass cable.

    • Use a Torx Plus 3IP driver to refasten the middle bracket.

    Editar

  8. How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Peel up the secondary liner: passo 7, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Peel up the secondary liner: passo 7, imagem 2 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar

    • Use tweezers, or your fingers, to peel up either one of the tabs at the top right corner of the secondary liner.

    • If the adhesive starts separating, use a spudger to hold it down while peeling.

    Editar

  9. How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 8, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 8, imagem 2 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 8, imagem 3 %32

    • Lift the tab and peel off the secondary liner to expose the top adhesive.

    Editar

  10. How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Apply the back glass: passo 9, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Apply the back glass: passo 9, imagem 2 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold, Apply the back glass: passo 9, imagem 3 %32

    • Align the back glass over its cutout in the frame.

    • Place a long edge of the back glass on the frame, making sure there are no gaps or jutting adhesive.

    • Place the other long edge of the back glass on the frame.

    Editar

  11. How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 10, imagem 1 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 10, imagem 2 %32 How to Apply New Back Glass Adhesive in Your Google Pixel Fold: passo 10, imagem 3 %32

    • Press down along the perimeter of the back glass to adhere it to the frame.

    • Let the phone sit a few hours for the adhesive to cure.

    Editar
Conclusão

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.

Autor(a)

com 2 outros contribuidores

Alex Diaz-Kokaisl

Membro desde: 01/16/22

124.996 Reputação

Autoria de 582 guias

Emblemas: 34

+31 outros emblemas

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 17.410 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 16

Duração total: 159