Conserte seus objetos Comunidade Loja

How to Apply Flash Unit Adhesives in Your Google Pixel 8a

Introdução

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Follow this guide to apply new flash unit adhesives in your Google Pixel 8a.

O que você precisa

  1. How to Apply Flash Unit Adhesives in Your Google Pixel 8a, Apply the logic board cover adhesive: passo 1, imagem 1 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a, Apply the logic board cover adhesive: passo 1, imagem 2 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a, Apply the logic board cover adhesive: passo 1, imagem 3 %32

    • Use tweezers to remove the conductive tape adhesive from the top right corner of the motherboard cover.

    • Use the flat end of a spudger to scrape up any remaining bits of adhesive.

    • Use a pipette or syringe to apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to the adhesive residue and wipe it away with a microfiber cloth.

    Editar

  2. How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 2, imagem 1 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 2, imagem 2 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 2, imagem 3 %32

    • Remove the conductive tape adhesive from its larger clear backing and put it into place with the tab on the right.

    • Use the flat end of a spudger to press down and secure the conductive tape.

    • Remove the remaining liner.

    Editar

  4. How to Apply Flash Unit Adhesives in Your Google Pixel 8a, Apply the flash unit adhesive: passo 3, imagem 1 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a, Apply the flash unit adhesive: passo 3, imagem 2 %32

    • Check the condition of the adhesive on the bottom of the flash unit.

    • If the adhesive is undamaged and still sticky, you can skip the rest of this guide and return to your original repair guide.

    • If the adhesive is damaged or no longer sticky, follow the next three steps to replace it.

    Editar

  5. How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 4, imagem 1 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 4, imagem 2 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 4, imagem 3 %32

    • During the remaining steps, be very careful not to strain or tear the delicate flash unit cable.

    • Use a spudger and tweezers to carefully scrape up and remove the old adhesive from the bottom of the flash unit.

    • Use a pipette or syringe to apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to the adhesive residue and wipe it away with a microfiber cloth.

    Editar

  6. How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 5, imagem 1 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 5, imagem 2 %32 How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 5, imagem 3 %32

    • Remove the flash unit adhesive from its larger, clear liner and put it into place on the bottom of the flash unit.

    • Use the flat end of a spudger to press down and secure the adhesive.

    • Remove the remaining liner.

    Editar

  7. How to Apply Flash Unit Adhesives in Your Google Pixel 8a: passo 6, imagem 1 %32

    • Firmly press the flash unit into place on the logic board cover to secure it with the adhesive.

    • Return to your original guide and continue with reassembly.

    Editar
Conclusão

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Autor(a)

com 2 outros contribuidores

Spencer Day

Membro desde: 09/14/22

59.654 Reputação

Autoria de 430 guias

Emblemas: 36

+33 outros emblemas

Equipe

iFixit Membro de iFixit

Staff

Membros da 141

Autoria de 17.893 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 13

Últimos 30 dias: 47

Duração total: 68