Introdução
This guide will walk you through how to replace a faulty or wobbly kickstand on a Hover-1 Eagle scooter. You should replace your kickstand if your kickstand is defective, wobbly, or not the proper length. To determine if you need to replace your kickstand, refer to our Troubleshooting Guide.
O que você precisa
-
-
Remove the two 6mm axle screws using a hex bit 4.0.
-
Remove the kickstand from the scooter.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
Cal Poly, Team S1-G2, White Winter 2020 Membro de Cal Poly, Team S1-G2, White Winter 2020
CPSU-WHITE-W20S1G2
Membros da 4
Autoria de 6 guias
