Pular para o conteúdo principal

Introdução

If your dryer isn't turning on, the back of the On/Off button that engages the power may be broken.

Peças

Nenhum componente especificado.

  1. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
    • Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

  2. PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora

    PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora
  3. Some pieces may fall out when removing the face of the handle.
    • Some pieces may fall out when removing the face of the handle.

    • Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

  4. Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in. Once the new switch is in place you can put the dryer back together.
    • Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in.

    • Once the new switch is in place you can put the dryer back together.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Candace

Membro desde: 23-01-2014

914 reputação

7 Guias de autoria

Equipe

Cal Poly, Team 10-33, Maness Winter 2014 Membro de Cal Poly, Team 10-33, Maness Winter 2014

CPSU-MANESS-W14S10G33

3 Membros

7 Guias de autoria

Looks to me that a replacement switch would be required. How can obtain one?

Jaky Felix - Responder

“No parts required” is what’s displayed by default when there’s no link to an actual part for sale—it’’s a bit silly and clearly incorrect in this case. For hard-to-find parts, check eBay or Amazon. Also, a lot of folks with multiple broken units use these guides to cobble together one working unit from the parts. Good luck!

Jeff Suovanen -

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 12

Todo: 1,833