Introdução

The Remote Control Socket is not difficult to access. However, it's connections are soldered, so it will be difficult to remove.

Peças

Não são necessárias peças.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Adicionar comentário

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Adicionar comentário

  • Remove the 4.8 mm black screw on the left side of the camera.

Adicionar comentário

  • Remove the front panel by lifting it away from the camera's body.

Adicionar comentário

  • Remove seven 4.25 mm black screws on the bottom panel.

Adicionar comentário

  • Remove the bottom panel.

Adicionar comentário

  • Remove two 6.5 mm black screws from the panel.

Adicionar comentário

  • Remove the plastic remote control socket cap by pulling it straight out.

Adicionar comentário

  • Slide panel toward bottom of camera to remove.

Adicionar comentário

  • Remove one 4.8 mm silver screw securing Remote Control Socket to camera.

Adicionar comentário

  • Remote Control Socket is now secured by 3 wires.

  • Desolder connections to replace Remote Control Socket.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Antonia

Member since: 17-04-2011

109 reputação

2 Guides authored

Equipe

Cal Poly, Team 8-8, Regan Spring 2011 Membro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 2,489